YS AL- CL
YS – AL- CL_ Audio plugin for mixing. Audio Leveler is a dynamic device for equalizing audio volume. By default, it has classic attack settings of 10ms and release of 60ms and a medium compression ratio (approximately 4:1). Two large knobs control compression and output volume. This is enough for most user tasks. Advanced settings are available for experienced users. 1_ Attack setting 0-100ms. 2_ Knee tilt adjustment from soft to hard. (approximately 3:1 to 20:1) 3_ Release setting 60-5000ms fixed. 4_ Enabling auto-release operating from the volume of the input signal coming to the compressor detector. By adjusting the sensitivity, you can adjust it so that quiet places and weak compression are released quickly, and loud places and deeper compression are released more slowly, eliminating sharp jumps and providing a smoother volume equalization. 5_Low-cut filter (20-2000 Hz) allows to remove excess energy coming to the detector. 6_Equalization with the upper shelf from 2000 Hz allows to add energy of the signal coming to the detector so that the compressor reacts to the middle component of the frequency spectrum, thereby limiting the sharpness. For fine-tuning, hold down the CTRL key. If the controls are not displayed due to a weak video card, then replace the images in the root of the plugin folder with a smaller renderer from the Resources folder, Knob 101 or Knob 51. By default, all elements are set for smooth switching with frame 151.
